Masonry work in Brooklyn

Brooklyn has the oldest building stock of the outer boroughs. Of roughly 268,000 tax lots carrying a building, about 73% predate 1940. That one number explains most of what makes masonry here different, and most of the ways it gets done badly.

Call (929) 412-6597 Send photos

Old stock means the mortar decides everything

Three-quarters of Brooklyn was built when brick was softer and mortar was lime-based. In that kind of wall the mortar is deliberately the weakest part: the building moves, the joints absorb it, and the brick survives. Repoint it in hard modern Portland cement and you invert that. The joints become stronger than the brick, the movement has nowhere else to go, and brick faces start blowing off.

This is the most common serious mistake made on Brooklyn buildings, and it is not cheap to undo: you go from repointing joints to replacing units. On brownstone and limestone fronts the same rule applies even more strictly, because the stone is softer still. The detail is on our brick pointing page.

Walk-ups and shopfronts

Brooklyn has around 63,000 walk-up apartment buildings, more than any other borough, and about 18,300 mixed residential-and-commercial buildings, also the most in the city. Those mixed buildings, a shop at street level with apartments above, are a particular kind of job: the facade is a liability over a public sidewalk and a shopfront at the same time, so the work has to be sequenced around a business that cannot simply close.

There are also about 2,100 lots with buildings over six storeys, which brings the facade inspection cycle into play on the larger buildings. See facade restoration. Just under 60% of lots are still one- and two-family houses, so plenty of the work is private owners too.

Landmark approval is routine here, not exceptional

Roughly 15,200 Brooklyn lots sit inside a Landmarks Preservation Commission historic district, about 5.7% of the borough. That is several times the rate in the Bronx or Queens, and it changes how a job is planned rather than whether it happens.

The largest districts are Park Slope, Brooklyn Heights and Cobble Hill. On those streets, exterior masonry work needs Commission approval before it starts, and the Commission can ask to see a mortar sample matched to the original in colour, texture and strength. None of that is difficult; it simply has to happen before equipment is booked, not after a neighbour makes a phone call.

Stoops

The Brooklyn stoop is both the front of the house and the part that fails first. Treads are horizontal so water sits on them, they are exposed on several sides so they freeze through, and they get salted every winter. On a stone-faced stoop the repair question is the same one as the walls: patch brownstone or limestone with hard cement and you will take more stone off at the edges of the patch than you saved. See stoops and steps.

What we get called for in Brooklyn

Neighbourhoods

Bay Ridge, Bensonhurst, Flatbush, Canarsie, Park Slope, Bushwick, Williamsburg, Crown Heights, Bedford-Stuyvesant and Sunset Park, among others. The building type changes a good deal between them, from the limestone rows of Bay Ridge to the rendered fronts of Bushwick, so it is worth telling us what your house is made of when you call.

Get a Brooklyn job priced

Send a photograph from across the street and one close enough to see the joints, and tell us whether you are in a historic district if you know. Call (929) 412-6597 or use the estimate form.

Building-stock figures: NYC Department of City Planning PLUTO, via NYC Open Data, November 2026. Counts are tax lots carrying a building.