Window lintels and sills
A lintel is the beam over a window or door that carries the wall above the opening. In most New York buildings it is a steel angle, sitting inside the masonry where nobody can see it. When that steel rusts it swells, and because it has nowhere to expand to, it lifts the brickwork above it. The stepped crack you can see from the street is the visible end of a problem that started inside the wall years earlier.
- NYC DCWP licensed
- Masonry rebuilt, not patched over
- Free written estimate
Call (929) 412-6597 Send photos of the windows
How to recognise a failing lintel
- Stepped cracks starting at the top corners of a window and running diagonally up through the mortar joints. This is the classic sign.
- A horizontal crack directly above the window, following the line of the steel.
- Brick above the opening pushed outward, so the course is no longer flush with the wall.
- Rust staining bleeding down the brick or the window frame.
- Rust or flaking paint visible on the steel itself where the underside of the lintel shows.
- The same pattern repeating over several windows on one elevation. Lintels were installed at the same time and they fail at the same time.
- A window that has started sticking as the opening distorts.
Why rust lifts a wall
Steel that corrodes does not simply get thinner. Rust occupies several times the volume of the steel it replaced, so a lintel corroding inside a wall behaves like a slow jack. The pressure has to go somewhere, and the easiest direction is up and out into the masonry sitting on top of it.
That is why pointing over the crack never holds. The joints open again because the thing moving them is still moving. It is also why this gets worse rather than stabilising: the cracks that open let more water to the steel, and more water means more rust.
What the work involves
- Confirm it is the lintel. Not every crack over a window is one, and not every rusted lintel needs replacing.
- Support the masonry above the opening before anything is cut out. This is the part that matters and the part that gets skipped.
- Remove the brickwork over the lintel carefully, keeping whatever can be reused.
- Cut out the failed steel and fit the new lintel with proper bearing at both ends.
- Protect the new steel against corrosion, and detail the opening so water drains out of the wall rather than sitting on the steel.
- Rebuild the masonry above, matching brick and mortar, and point the surrounding area in.
Step two is where corners get cut. Taking brick out from over an opening without supporting the wall first is how a repair becomes a collapse.
Repair or replace
Not every rusty lintel comes out. Where the steel has only surface corrosion and is still sound, it can sometimes be exposed, cleaned back, treated and the masonry rebuilt over it, which costs less and disturbs less of the wall. Where the steel has lost real section, delaminated into layers, or already moved the brickwork, replacement is the only honest answer, and anything else is paying twice.
We will tell you which one you are looking at, and we would rather say “this one can be treated” than sell you a bigger job.
Sills
The sill at the bottom of the opening is meant to throw water clear of the wall below. When a stone or concrete sill cracks, loses its slope, or has its drip edge filled in with paint or a well-meant bead of caulk, water runs straight back into the masonry instead. The symptom often shows up as damp below the window and gets blamed on the window itself.
We repair or replace sills in stone, concrete or brick, and we keep the slope and the drip detail doing what they were designed to do.
What changes the price
- How many openings. Lintels fail as a set, so the realistic question is usually how many windows on this elevation, not whether to do one.
- Access. A ground-floor window is a different job from the fourth floor with a lift.
- How much masonry has moved. If the brick above has shifted, more of it comes out and goes back.
- Matching brick on an older building, where the replacement may need sourcing.
- Landmark approval where the building is in a historic district.
[OWNER TO CONFIRM: masonry warranty]
Questions people ask about lintels
Is a cracked lintel dangerous
Usually not immediately. These failures take years, and most of what we see is ugly and getting worse rather than about to fall. The exceptions are worth taking seriously: brick that has visibly moved outward, anything loose above a doorway or a sidewalk, and cracking that has opened noticeably over a few months. If masonry is loose above a public footway, keep people away from it and call somebody the same day.
Can the crack just be filled
Filling the crack treats the symptom and leaves the cause expanding inside the wall. It buys a season at best. The one situation where it makes sense is as a temporary measure to keep water out while a proper repair is scheduled, and then it should be described that way rather than sold as a fix.
Do I need a permit to replace a lintel
For a straightforward like-for-like replacement on a small residential building, generally not, though the access equipment can need one. A landmarked building needs Landmarks approval for the visible work. If an opening is being widened or the structure altered, that is a different conversation involving filed plans, and we will say so rather than work around it.
Should an engineer look at it first
For a single window with a classic stepped crack, no. If several openings on one elevation have moved, if cracks run through the bricks themselves rather than the joints, or if any part of the wall is bulging, then yes, and we will tell you so before quoting.
Where we do this work
The Bronx, Queens, Brooklyn and Manhattan, mostly on pre-war brick houses, two- and three-family buildings and walk-ups, which is where steel lintels of this age are.
Send a photograph of the window
One photograph taken straight on, showing the window and the brick above it, is usually enough for us to say whether it looks like a lintel. Call (929) 412-6597 or use the estimate form. Related work is on the masonry page.