Thorocoat on brick, block and stucco
Thorocoat is a brand of water-based acrylic masonry coating, now part of Sika’s range, used on above-grade concrete, brick, block, stucco and EIFS. In New York people ask for it by name the way they ask for a particular brand of paint, and it is a good product. It is also routinely used in a situation it was never designed for, which is why some walls look worse two winters after they were coated.
- NYC DCWP licensed
- Surface prepared, not just painted
- Free written estimate
Call (929) 412-6597 Send photos of the wall
The thing most people are not told
Thorocoat is a high-build acrylic coating, not an elastomeric one. The manufacturer’s own data is explicit about what that means in practice: the standard Thorocoat products are not crack-filling or crack-bridging coatings. For a substrate with moving cracks, Sika points you at Thorolastic instead, which is the elastomeric version in the same family and is formulated to bridge movement.
This matters because the most common reason an owner wants a wall coated is that the wall is cracked. Put a non-bridging coating over a crack that opens and closes with the seasons and the coating splits along the same line, usually within a winter or two. The wall then looks freshly failed rather than honestly old, and water uses the split exactly as before.
So the first question on a coating job is not which colour. It is whether your cracks are dormant or moving, and whether the right answer is a high-build coating, an elastomeric one, or masonry repair before any coating at all.
What the coating does well
- Sheds rain off a porous wall that has become absorbent with age, so the masonry stops soaking up every storm.
- Evens out a patched elevation, where repairs in different mortars and renders have left a wall that is sound but looks like a map.
- Gives a uniform finish over brick, block and stucco in one colour.
- Protects a repaired surface, and it is a sensible last step after masonry or stucco work rather than a substitute for it.
What it will not do
- Hold a wall together. If mortar joints have failed, coating over them hides the problem and the wall keeps losing joints underneath. That is a pointing job first.
- Bridge a live crack, for the reason above.
- Stop water arriving from above. A failed coping, a cracked parapet or a downspout discharging against the wall will defeat any coating.
- Dry out a wall that is already saturated. Sealing a wet wall traps the water where it can keep doing damage, and it will push the coating off from behind.
- Fix rising damp at the base of a wall, which is a different problem with a different answer.
Preparation is most of the job
Coatings fail at the bond, almost never in the middle of the film. The work that decides whether yours lasts happens before anything is applied.
- Clean the wall down so the coating meets masonry rather than dirt, chalk from an old coating, or loose material.
- Repair the masonry: point failed joints, replace broken brick, cut out and rebuild debonded render.
- Deal with the water source above, whether that is a coping joint, a sill, flashing or a downspout.
- Let the wall dry. Coating a wall that is still wet inside is the most common way this work fails.
- Prime where the surface needs it, then apply in the number of coats the product calls for, at the spread rate it calls for. Thinning it to cover more wall is how a ten-year coating becomes a three-year one.
Thorocoat or stucco
They are different things and people mix them up. Stucco is a cement render with real thickness that forms a new surface over the wall. A coating is a thin film applied to a surface that already exists.
If a wall is uneven, damaged or has lost its finish, it needs render. If the wall is sound but porous, stained or patched, it needs a coating. Rendering a wall that only needed coating wastes money; coating a wall that needed rendering fails. Our stucco page covers the render side.
What changes the price
- Condition of the wall, since preparation and repair usually cost more than the coating.
- Which product the wall actually needs, standard or elastomeric.
- Area and access.
- Number of coats, which the manufacturer specifies rather than us.
- Colour, where a deep or custom colour costs more.
[OWNER TO CONFIRM: masonry warranty]
Questions about coating a wall
How long does a masonry coating last
Well prepared and applied at the right thickness on a dry, sound wall, a good acrylic coating lasts many years. Applied over dirt, damp or failed joints, it can start lifting in two. The variable is almost entirely the preparation, which is also the part a cheap quote removes.
Can you coat over paint that is already there
Sometimes, if the existing paint is sound and well bonded. Often not: old masonry paint chalks, and a new coating bonded to a chalky layer is bonded to something that is already letting go. We test it rather than guess, because getting this wrong takes the new coating off along with the old.
Will it stop my leak
If the water is soaking through a porous wall face, very likely. If it is coming through open joints, over a parapet, around a window or up from the ground, no. Which it is can usually be narrowed down from where the damp appears inside and when it appears after rain, and that is worth ten minutes before anybody quotes a coating.
Which product we would use on your wall
The right coating depends on the substrate and whether the cracks move, so we specify it after looking rather than before. [OWNER TO CONFIRM: masonry warranty]
Where we do this work
The Bronx, Queens, Brooklyn and Manhattan.
Get the wall assessed first
Send photographs of the whole wall and close-ups of any cracks. If the cracks look live, we will tell you that a coating alone is the wrong purchase. Call (929) 412-6597 or use the estimate form.
Product information comes from the manufacturer: Sika Thorocoat and Thorolastic. Always follow the current data sheet for the product actually specified.